以下是箭头指标，我想在原指标的基础上再加一个20均线指标上去做过滤做多箭头对应的K线收盘价要必须要大于20均线才将做多箭头显示出来，反之 做空箭头对应的K线收盘价要必须要小于20均线才将做多箭头显示出来 如下图 123333.jpg

//+------------------------------------------------------------------+ //| ASCTrend1sig_noSound.mq4 //| Ramdass - Conversion only //+------------------------------------------------------------------+ #property indicator_chart_window #property indicator_buffers 2 #property indicator_color1 Magenta #property indicator_color2 Blue //---- input parameters extern int RISK=3; extern int CountBars=300; //---- buffers double val1; double val2; //+------------------------------------------------------------------+ //| Custom indicator initialization function | //+------------------------------------------------------------------+ int init() { //---- indicator line IndicatorBuffers(2); SetIndexStyle(0,DRAW_ARROW); SetIndexArrow(0,234); SetIndexStyle(1,DRAW_ARROW); SetIndexArrow(1,233); SetIndexBuffer(0,val1); SetIndexBuffer(1,val2); //---- return(0); } //+------------------------------------------------------------------+ //| ASCTrend1sig | //+------------------------------------------------------------------+ int start() { if (CountBars>=1000) CountBars=950; SetIndexDrawBegin(0,Bars-CountBars+11+1); SetIndexDrawBegin(1,Bars-CountBars+11+1); int i,shift,counted_bars=IndicatorCounted(); int Counter,i1,value10,value11; double value1,x1,x2; double value2,value3; double TrueCount,Range,AvgRange,MRO1,MRO2; double Table_value2[1000]; value10=3+RISK*2; x1=67+RISK; x2=33-RISK; value11=value10; //---- if(Bars<=11+1) return(0); //---- initial zero if(counted_bars<11+1) { for(i=1;i<=0;i++) val1[CountBars-i]=0.0; for(i=1;i<=0;i++) val2[CountBars-i]=0.0; } //---- shift=CountBars-11-1; while(shift>=0) { Counter=shift; Range=0.0; AvgRange=0.0; for (Counter=shift; Counter<=shift+9; Counter++) AvgRange=AvgRange+MathAbs(High[Counter]-Low[Counter]); Range=AvgRange/10; Counter=shift; TrueCount=0; while (Counter=Range*2.0) TrueCount=TrueCount+1; Counter=Counter+1; } if (TrueCount>=1) {MRO1=Counter;} else {MRO1=-1;} Counter=shift; TrueCount=0; while (Counter=Range*4.6) TrueCount=TrueCount+1; Counter=Counter+1; } if (TrueCount>=1) {MRO2=Counter;} else {MRO2=-1;} if (MRO1>-1) {value11=3;} else {value11=value10;} if (MRO2>-1) {value11=4;} else {value11=value10;} value2=100-MathAbs(iWPR(NULL,0,value11,shift)); // PercentR(value11=9) Table_value2[shift]=value2; val1[shift]=0; val2[shift]=0; value3=0; if (value2=x2 && Table_value2[shift+i1]<=x1){i1++;} if (Table_value2[shift+i1]>x1) { value3=High[shift]+Range*0.5; val1[shift]=value3; } } if (value2>x1) {i1=1; while (Table_value2[shift+i1]>=x2 && Table_value2[shift+i1]<=x1){i1++;} if (Table_value2[shift+i1]